Корзина
11 отзывов
+380976114732

Вудкомплект

Антисептик YMM031

  Антисептик YMM031, фото 1
next previous
В наличииОптом и в розницу

70 грн.

Показать оптовые цены
  • 65 грн.
    при заказе от 50 л
Купить
  • +380 показать номер +380 (97) 611-47-32
  • Адрес и контакты
    • Телефон:
      +380 (97) 611-47-32
    • Контактное лицо:
      Александр
    • Адрес:
      ул.Новоконстантиновская 8, Киев, Украина

Разбавляется водой 1:1. Наносится кистью,валиком.

 

 

 

 

 

 

YM---M031

Clear waterborne Primer for exteriors – For low in tannin hardwood and softwood

 

 

 

Renner Italia Spa – Via Ronchi Inferiore, 34 - 40061 MINERBIO (BO)                                                                        

 

Main properties:

  • Suitable for tannin low  softwood and hardwood
  •  Good uniformizing results on Pine, Spruce, Hemlock
  • Not suitable for Oak, Chestnut, Iroko woods

 

  • It contains  IPBC
  • It contains  Propiconazolo

 

Versions:

YM---M031

clear

 

 

 

 

 

 

 

Recommended use:

  • Windows
  • Shutters
  • Entrance doors
  • Garden furniture
  • Gazebo
  • Balconies
  • Roof beams
  • Matchboard and cladding
  • Fences

Application method:

Flow-coating  and dipping basin

Blending instructions

Ready to use. In case of need , thinning with tap water at ratio 1:1

 

Chemical-physical properties 

 

Application properties

Solids content (%)

7 ± 1

 

Recommended N° of coats

1

Specific gravity  (g/cm3)

 1,010 ± 0,030

 

Recommended quantità per coat

min: 50 g/m2  max: 80 g/m2

Viscosity DIN 2 (s)

 47 ± 2

 

Spreading rate (m2/litre)

 12 - 18

pH

 7,6 - 8,6

 

 

 

 

General coating system recommendations
 Drying at 20°C and RU% between 45 and 65:  65 g/m2

 

Forced drying:  65 g/m2

Over coating time

                    2 - 4 h

 

 

Temperature

Time

Stackable (vertical position)

4 h

 

Flash Off

Room

15 minutes

Sanding time

4 h

 

Laminar air

30°C

30 minutes

 

 

 

Cooling

Room

15 minutes

 

 

 

Over coating time

Just after offloading

 

 

 

Stackable (vertical position)

Just after offloading

 

 

 

Sandable

4 h

 

Substrate preparation:

Wood must be well dry (12-14% humidity). Clean well the surface removing all traces of grease, waxes and resins.

Bare wood should be sanded with 150 grit paper for softwood , 180 grit paper for hardwood

Application instructions:

Flow-coating: use diaphragm pump.

Dipping tanks: use only stainless steel tanks (AISI 304).

Brush: use only mixed or synthetic hair

Sanding

Manual: ● (220-240)

Orbital: -

Automatic: -

Brushing machine ● (220-240)

Overcoating:

With exterior grade waterborne products of the series AQUARIS.

For further information and coating systems with our range of waterborne products , please refer to the Main Guide

 

General remarks

·          Mix well before use.

·          If properly stored at temperatures between  5 and 35°C, shelf life is 18 months

  • It cannot be applied at temperatures below 15°C; cold weather applications could negatively affect chemical and mechanical characteristics.
  • Coating left overs (washing waters, waters from spray booths, used coatings) must be disposed of according to local regulations. Never dispose residues directly into drains.
  • Application tools must be cleaned with water after use. When dry films must be removed, AY---M460, special detergent should be used, letting it work overnight and then cleansing with water

 

What to do in order to…..

Add % of use

%

% of use

Eliminate foam created during flow coating operations

AY---M420

0,050

12,5

Slow down drying

AY---M450

2 - 5

500 - 1250

Prolong the shelf life of used product

AY---M435

0,100

25

To restore flowing of used product

AY---M447

1 - 2

 250- 500

 

Характеристики
Основные
Производитель   Renner Italia
Страна производитель Италия
Бесцветный материал Да
Информация для заказа
  • Цена: 70 грн./л
Отзывы о товаре
Добавить отзыв

Отзывов пока нет, будьте первыми!